SYSINFO is a freeware tool from GreenHouse Software & Consulting.

It displays the actual system parameters.

Command syntax is:

   SYSINFO [/OUT <file>/] [BRIEF|DETAIL]

where

  OUT <file>  defines the file, to which the output is sent.
              In case it does not exist, an EDIT type file is
              created, and used.

  BRIEF       when present causes SYSINFO to strip down the output
              to the minimum needed.

  DETAIL      when present displays volume information at the end of
              the system information.

e.g.

$GHS1 SYSINFO 55> run sysinfo
SYSINFO (164) - T7172L06 - (01Dec2025)   System \OAK, running NSK L23.08.01
Copyright (c) GreenHouse Software & Consulting 1994..2020
Copyright (c) GreenHouse GmbH 2021..2025
SUT shows:                  L23.08.01
RLSEID shows:               L23.08.01
Proc call shows:            L06.16
GUARDIAN loaded from:       $SYSTEM.SYS02.OSIMAGE
Actual GMT:                 01.12.2025 10:19:06.531761
Actual LCT:                 01.12.2025 11:19:06.531761
System load time was (LCT): 01.12.2025 09:23:10.000000
SYSGEN time was (LCT):      06.06.2024 14:16:44.000000
System is running since:    0 days, 01:56:07.061110
$READ time is:              6967315299
System EXPAND Name:      ** \OAK
System EXPAND Number:    ** 254
System Serial Number:    ** 078689
TOS Version:             ** V06
Time offset to GMT:      ** +1:00
Time Zone:               ** +1:00   (= 3600 seconds  =  60 minutes)
Number of CPUs:          ** 2
Number of cores per CPU: ** 2
CPU Status (0 .. 15):       1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Physical Cores:             2 2 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Enabled Cores:              2 2 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Processor Model:            11/7
Processor Type:             NS3 X1  (HPE Integrity NonStop X NS3 X1 CPU)
NonStop Dynamic Capacity:   Not enabled
Number of pre-enablements:  None
All Processors have:        65012 MB main memory
DFF2BD615CE06867FB8DC880E038EFE09FF51010BF651643569F915CFC364DC9
$GHS1 SYSINFO 56>

$GHS1 SYSINFO 57> run sysinfo brief
SYSINFO (164) - T7172L06 - (01Dec2025)   System \OAK, running NSK L23.08.01
Copyright (c) GreenHouse Software & Consulting 1994..2020
Copyright (c) GreenHouse GmbH 2021..2025
System EXPAND Name:      ** \OAK
System EXPAND Number:    ** 254
System Serial Number:    ** 078689
TOS Version:             ** V06
Time offset to GMT:      ** +1:00
Time Zone:               ** +1:00   (= 3600 seconds  =  60 minutes)
Number of CPUs:          ** 2
Number of cores per CPU: ** 2
C26A71461E18C67484AFF53AA7674EE7467D77D041194B8D5B2CC1C2B7292CB7
$GHS1 SYSINFO 58>

To load it onto your Tandem system, perform the following steps:

1. Load SYSINFO in binary format onto your Tandem system, and name it
   SYSINFO.

2. Change the file code of the uploaded file with FUP to the files extention
   number, which is 100, 500 or 800.
   e.g.:  FUP ALTER SYSINFO,CODE 100

3. Just run SYSINFO.
   Use the RUN command to run this version of SYSINFO, else the HP
   provided version is executed.

To direct SYSINFO to write the system parameters into a disk file,
start it with an OUT file, e.g.:

  SYSINFO/OUT <info>/

and all data is written into <info>.

In case <info> exists, the information is appended at the EOF.
In case <info> does NOT exist, it is created as an EDIT type file.

GreenHouse GmbH, 01Dec2025
Info@GreenHouse.de
